Brugtgrej.dk
Forside  |   Ny annonce  |   Forum  |   Nyhedsmails  |   Om brugtgrej  |   Kontakt Brugtgrej
189 online brugere
3052 online annoncer
SælgesKøbes

Sælges: Yaesu FTM-10

ID:178735
Pris: 1999 kr
Kategori: Amatørradio \ Radio VHF/UHF
Oprettet: 18/11-2021

Sælger

Bo V. Fyhring
Lodbjergvej 20
7770 Vestervig
DK
Mob: 50562055 privat

Kontakt sælger

Andre annoncer fra denne sælger (7)



Pris 1999 kr.

Lille dualband radio sælges

Der mangler mobilbeslag men resten er med.inkl separation sæt

Desuden er der installeret BU-1 Bluetooth unit.
Der medfølger men ikke installeret CAB-1 lader men ingen head set.

Desuden er options mic MH 68 B6J med.
radioen lytter meget bredt også WFM radioen er ikke åben i TX

manual og original indpakning haves

sender fin en 30 - 40 w ud målt på min gamle Bird.
Specification:

The high power RF output of the FTM-10R/E* is produced by the heavy duty, high efficiency, RF POWER MOS FET amplifier. Powerful and reliable 2 m / 70 cm Band operation is guaranteed.

•The FTM-10R/E* has a completely independent AM/FM broadcast radio receiver, in addition to the ham band receiver. You will enjoy broadcast band receiver coverage, and high quality operation on the 2 m / 70 cm bands at the same time.

•Band Group Memory System The versatile memory system uses up to 500 memory channels. Each memory channel can be labeled with an 8-digit alphanumeric tag. The memory channels may be recalled by a specific operating band, if desired.

•The FTM-10R/E* has a large 2 inch/50 mm , 1.5W speaker in the die-cast chassis and is equipped with a high power 8-watt audio amplifier, and a PA function for outdoor operation with the optional MLS-200-M10 speaker(s). A high quality 1.1 inch/28 mm speaker is built into the detachable front panel; you can operate it like an HT!

•The simple hanger type bracket may be attached to the top or bottom. The front panel may be tilted up or down 20 degrees with an adaptor bracket. The basic installation kit is included. (With the adapter bracket, 10 ft / 3 m separation control cable, magnetic mount, and the one-touch release hanger bracket.)

•The optional, moisture and dust protected MLS- 200-M10 external loudspeaker is available for use in a noisy outdoor environment. •The microphone and PTT button are built into the front panel. Detach the front panel with onetouch release when transmitting! The detachable front panel may be separated from the main chassis, and attached to a flat metal surface with the magnetic mounting bracket. NB: 1) Use of a communication device with a display while driving may be prohibited in some states and some Countries. 2) Optional microphones and the external microphone jack MEK-M10 are also available.

•Hands-free operation is possible, using the wireless Bluetooth¤ option, and a headset.

•A minimum number of key buttons on the front control panel, for safer operation during motor sports activities. The large multi-functional dial and durable keys are easy to operate even when wearing gloves.

•Equipped with a high power 8-watt audio amplifier. Use the PA function with the optional, commercial grade MLS-200-M10 speaker.

•With the intercom feature, you can communicate with a fellow passenger. Hands-free intercom operation is available with the optional Bluetooth® function.

•AF Dual Monitor Function: Listen to your favorite AM or FM stereo broadcast station, and monitor an ham band at the same time! External audio input is also available to connect your iPod®!

•The Smart Key feature: The "F" key on the control panel accesses the most frequently used functions.

•AF Pre-Set Function The audio volume bar appears on the LCD screen and shows an orange warning if the volume is below a Preset level, preventing you from missing lower volume audio stations.

•Tone control

•Band Up/Down key for easy operation.

•Simple key locking.

•Automatic Volume Control can adjust the speaker volume relative to a nearby noisy environment.

•Dimmer — Display brightness control.

•Three transmit power levels are available: 50W (70 cm : 40W) / 20W /5W

•The VOX function includes automatic audio delay on transmit to ensure transmission of the start of your message.

•The Time-Out Timer (TOT) function can end a continuous transmission after a preset time.

•The Internet Connection Feature can be used to access the Vertex Standard WiRES-II™ system.

•Various scanning features.

•DC input voltage display

•The Smart Search feature that will scan and load frequencies automatically where activity is found.

•The ARTS™ (Automatic Range Transponder System) feature which provides audio and/or visual confirmation that another ARTS™ equipped station is within communication range.

•The Club Channel Monitor function permits your group to always monitor the designated user-defined frequency.

•The message function can transmit alphanumeric messages (up to 20 messages/16 characters maximum) with a sender’s ID. In an emergency the message can be communicated even in a noisy outdoor environments.

•Wireless cloning allows transfer of memory information without any cable.

•Includes an event timer stopwatch with an interval function to support many outdoor motor sports activities.

•Enjoy your FTM-10/E* outdoor with your motorcycle, SUV or RV anywhere! The commercial grade front panel meets the IP57 standard. (Waterproof at 3 feet (1 m) for 30 minutes, and protection against dust.) All connectors are waterproof.

•The main body of the FTM-10R/E* is a solid die-cast aluminum sandwich structure. The high quality die-cast aluminum chassis doubles as the heat sink providing more than enough air-cooled ventilation for the power modules. The sandwich structure also provides far better resistance to vibration and shock than many conventional transceivers and radios.

•The design shields against ignition noise and alternator whine for mobile operation!

Technical Specifications:

Frequency Range: RX: 0.5 - 1.8 MHz (AM BC)
76 - 108 MHz (FM BC)
108-137 MHz (Air Band)
137-174 MHz (144 MHz HAM)
174-222 MHz (GR1 VHF TV)
300-420 MHz (GR2 )
420-470 MHz (430 MHz HAM)
470-800 MHz (GR1 UHF TV)
800-999 MHz (GR2 USA Cellular Blocked)
TX: 2 m /70 cm ham Bands
Channel Steps: 5/6.25/8.33/(9)/10/12.5/15/20/25/50/100/200 kHz (9): AM Only
Emission Type: F3E, F2D
Antenna Impedance: 50 Ohms
Frequency Stability: ± 5 ppm @ 14° F ~ +140° F (–10° C ~ +60° C)
Operating Temperature Range: –4° F ~ +140° F (–20° C ~ +60° C)
Supply Voltage: Nominal: 13.8 V DC, Negative Ground
Operating: 11.7 ~ 15.8 V, Negative Ground
Current Consumption: RX: 0.5 A (Receive) (Approx.) 8.3 A / 6 A / 2A (TX, 2 m 50W / 20 W / 5 W) 8.5 A / 6 A / 2A (TX, 70 cm 40W / 20 W / 5 W)
Case Size (W x H x D): 4.4" x 1.5" x 7" (112 x 37.6 x 178 mm) (w/o knobs & connectors)
Weight (Approx.): 2.9 lb. (1.3 kg)
Transmitter
RF Power Output: 50/20/5 W (2 m) 40/20/5 W (70 cm)
Modulation Type: Variable Reactance
Maximum Deviation: ±5 kHz
Spurious Radiation: At least –60 dB below
Microphone Impedance: 2 k?
Receiver
Circuit Type: FM / AM: Double-Conversion Super heterodyne
WFM: Triple-Conversion Super heterodyne
AM / FM Radio: Single-Conversion Super heterodyne
Intermediate Frequencies: FM / AM: 1st: 47.25 MHz, 2nd: 450 kHz WFM: 1st: 45.8 MHz, 2nd: 10.7MHz, 3rd: 1MHz FM Radio: 130 kHz, AM Radio: 50 kHz
Sensitivity: 5 ?V TYP for 10 dB SN (0.5-1.7 MHz, AM)
2 ?V TYP for 12 dB SINAD (76-108 MHz, WFM)
0.8 ?V TYP for 10 dB SN (108-137 MHz, AM)
0.2 ?V for 12 dB SINAD (137-140 MHz, FM)
0.2 ?V for 12 dB SINAD (140-150 MHz, FM)
0.25 ?V for 12 dB SINAD (150-174 MHz, FM)
1 ?V TYP for 12 dB SINAD (174-222 MHz, WFM)
0.8 ?V TYP for 10 dB SN (300-336 MHz, AM)
0.25 ?V TYP for 12 dB SINAD (336-420 MHz, FM)
0.2 ?V for 12 dB SINAD (420-470 MHz, FM)
5 ?V TYP for 12 dB SINAD (470-540 MHz, WFM)
5 ?V TYP for 12 dB SINAD (540-800 MHz, WFM)
0.4 ?V TYP for 12 dB SINAD (800-899.99 MHz, FM)
0.8 ?V TYP for 12 dB SINAD (900 - 999.99 MHz, FM)